06-25-2004, 01:03 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Sep 2001
Posts: 168
|
|
Idle speed screw question
My idle dropped recently so I turned it up by adjusting the screw on the linkage. I can't seem to get the idle to the right rpm, it's either a little too high or too low. Right now in gear with a.c. on it reads about an 1/8" above the 800 rpm tick mark. I believe it to be about 850-900 rpm.
Is the idle speed screw a regular screw with a locknut? I would like to remove it and check the threads, I believe that they are stripped in the area that I want to set it.
__________________
1997 2500 ext cab, 4WD Auto, 3.54 gears:
KDP has been fixed!
Rancho 9000's
Gauges
#10 plate
Too many lights
Disconnected height sense valve
|
|
|
|