11-23-2004, 07:39 PM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Sep 2004
Location: Kentucky
Posts: 244
|
|
Need help quick with injection pump leak
I drove my hybrid for the first time today. All was well, then it started missing. I found a leak at the injection pump. I am not real good with the terminology so bear with me. On top of the P pump, there are the six thingies that the fuel lines attach to. Each thingy has 2 bolts that appear to hold it down. The fuel is leaking between the injection pump body and the bottom of thingy number 3. It looks like tightening down the 2 bolts would stop the leak but it does not. I believe the thingies I refer to are what needs to be removed when changing delivery valves. Is there a gasket or o-ring under there? Is any special tools needed to get to it? I have removed the two bolts but am unable to get it out. I didn't want to get too persuasive with it until I asked you guys. By the way, what is the correct term for the thingy I am talking about?
HELP!
Thanks,
Danny
__________________
1993 Ford F350 4x4, reg cab, SRW, ZF 5sp., CPL2174 12V Cummins, BHAF, 4" exhaust, 3.55s, 12K Warn winch, Westach Boost/EGT combo gauge, 100 plate.
|
|
|
|