NV4500 1-1/4 to 1-3/8 EEP DD Conversion

NV4500 1-1/4 to 1-3/8 EEP DD Conversion

09-29-2005, 06:54 PM

#1 (permalink)

AndyMan

Offline
Join Date: May 2003 Location: Nashville, TN Y'all Posts: 1,543 Photo Gallery Old Reader's Rigs Gallery

NV4500 1-1/4 to 1-3/8 EEP DD Conversion

Well, I'm not having a lot of luck selling this nearly new Enterprise Engine Mitchell Dual Disc clutch that was new with the truck I just bought. As luck would have it though, today as I was calling around trying to get people to put an ad up in their shop for the clutch, I ran across a guy who has the same clutch with the 1-3/8" shaft. The clutch itself is shot, BUT the shaft and hubs are in good shape. My question is this. What all do I need in the 1-3/8" size in order to run the larger shaft?

I know I need the following:
1. Hubs from the two friction plates
2. the entire disc that goes between the friction plates
3. The input shaft itself

What else?
1. Will the flywheel I have already work with the larger input shaft? Just a bigger pilor bearing maybe?
2. throwout bearing have to be bigger?
3. Pressure plate?
4. Are their other WEAR parts that I will have to replace? I can use my existing brand new friction plates and just have the bigger hubs mounted in them.

I don't know what all has a center that must mate up to the bigger shaft.

Thanks for the info.

__________________
99 4wd 6spd

The world is a dangerous place, not because of those who do evil, but because of those who look on and do nothing.
-- Albert Einstein.

Non members can only view the initial post on threads more than 7 days old. There are 14 additional replies on this thread that you could view if you were a member.

TDR Membership offers many benefits including:

4 issues of the TDR magazine per year including these columns:
- Tailgating - A Letter From The Editor
- Letter Exchange - Responses From The Readers
- Member2Member - Members' Solutions To Members' Questions
- Technical Topics - Service/Parts Update
- First Generation - Owner-Specific Articles On The '89 - '93 Dodge Diesel Trucks
- 12-Valve Engines - Owner-Specific Articles On The '94 - '98.5 12-Valve Dodge Diesel Trucks
- 24-Valve Engines - Owner-Specific Articles On The '98.5 - '02 24-Valve Dodge Diesel Trucks
- Third Generation - Owner-Specific Articles On The '03 And Newer Dodge Diesel Trucks
- Blowin' In The Wind - Industry News
- Shadetree - Back To The Basics
- Celebrity Corner - The Shadetree Mechanic - Sam Memmolo
- From The Shop Floor - Tips From Turbo Diesel Repair Shops
- Products Showcase - Featured Products
- TDRelease - Vendor Press Releases
In many areas of the country a local chapter with events
A yearly printed copy of the TDR Travel companion listing approximately 700 TDR members across the country willing to help you if you have trouble on the road
Complete access to the TDR website including:
- Ability to do advanced searches over 1.1 million posts
- Access to members only forums (Truck 911, FAQ Forums, Discontinued parts support, Rigs spotted, Pay it forward, Other, and Political)
- Posting ability to the forums
- Ability to read an unlimited number of posts from the forums
- Can customize your forum list to your interests
- Can choose 1st, 2nd, 3rd gen, or rotating header graphics
- Limit searches to forums your interested in
- View posts since you last logged on
- Private message ability to other members
- Chat room access
- Diesel truck specific TSB listing by model year
- Online access to the Travel Companion database (with most current information)