Water/meth how much do you run?

[LEnglish]

I do my own kit with the sureflow pump. With my single biggest jet (M15) and 230psi out of the pump which is about 1400ml worth of meth. I made an extra 100hp and 170TQ. I have not heard and extra rattle yet. When I had my 6.5 I herd the rattle so I know what it sounds like.

With the truck like this the EGT's were not what I liked hiting 1500deg buy the top of Drive.

Tonight we added one of our smallest jets (M5) which is about 300ML worth so that put's me at a total of around 1700ml. We than have gone to 50/50mix. the EGT's are somewhat better toping 1500deg in OD at 2600RPM. The EGT's will start to swing hard any thing over 2600RPM. The truck does not feel near as fast as it did with the straight meth. This set up gives me about 150deg drop in EGT's till 2600RPM. Once I hit 1500deg I get out of it.

From talking to people thay seem to tune like this. Add water till she spuders and come back some. add meth till she rattles and come back some. Does this sound right?

I have been told straight meth will raise the EGT's and water drops them. From what I can tell the meth did not rase the EGT's but did not lower them eather. So good free power.

So I feel like I am injecting quite alot right now and not sure if I want to even push it any more.

So for the guys who like to play how much water or meth have you injected?

Has any one hurt there motor with no warning maning no rattle, spudder or high EGT's playing with the meth?