|
Need a NV4500 back-up switch connector
My backup lights don't work. I popped the connector off and jumped the two pins and the lights came on. I ALMOST ordered a switch, but instead pulled it off and did a continuity check and it works. So I cut the connector off to have a good look at the pins and one is bad so it isn't making good contact with the switch female fitting. The local pick & pull only has hulks that had autos in them. I have a homemade backup light mounted under the rear fender hooked to a toggle switch but I would like the stock lights to work correctly also. Anyone have a source?
__________________
97 5500, 2wd, 5-speed, 3.54 gears, #11 plate for speedin' it up (thanks Joe D) and a Jacobs e-brake for slowin' it down. Member of 650k+ mileage club
|