Incurable Rear brake shudder solved?

[Archive]

I've been one of the ones posting about an incurable rear brake shudder on my 98 2500 QC 4x4. Here is something that may intrest those of you experinecing similar problems with 2500 4x4's.

I just got a page of a fax regarding Dodge's new fix for 2500 4x4 (only, so I hope that's what you have) brake shudder. Here's what it says:

"A vibration on some 2500 4x4 vehicles during light brake applications has been incorrectly
diagnosed as out of round rear brake drums. Although turning or replacing the drums has an impact on the problem, it is only temporary. As the linings burnish the new surface, the vibration returns.

If the vibration feels like out of round drums but occurs at typically lower speeds (10-40mph) with light brake application and does not occur at higher speeds (50-70mph), turning or replacing the drums will not be a permanent repair."

It then describes a repair procedure involving checking tire pressure (50 front, 40 rear), verifying that the tires are in good shape, and installing shims between the front cab body insulators and the radiator core support. It states that the truck will have to be driven up to 100 miles following the repair to gain the full affect of the repair.

The problem description matches my experience exactly. My truck has been at the dealer (who's service manager has lost a fair amount of hair over my vehicle) 10 times for this problem since 1998. I have an appointment to have the work done the week of 08/14 (the next convenient time for me). I don't have the TSB#, but let me know if anyone wants it and I'll ask my dealer. I hope this helps someone.

Brad