03-16-2003, 07:13 PM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Jan 2001
Location: Luray VA
Posts: 113
|
|
Confirmation Question
Okay guys... I have exhausted my capabilities to try and fix my no start problem
My fuels solenoid will not pull in on it's own.
I am about to take it to a Cummins shop and what I want you all to confirm is WHEN I GROUND THE BLACK WIRE AT THE THREE PRONG CONNECTOR TO THE RELAY AND PUT POWER TO THE WHITE WIRE THE SOLENOID PULLS IN >>>> THIS I HAVE READ MEANS THAT THE SOLENOID IS GOOD IS THIS CORRECT?????
I don't want to have the shop replace something I know to be good. So I want to be sure before I tell them I know it is working.
Thanks guys for your help but the problem escapes my meager abilities to find the trouble. I have replaced the relay and cleaned and ect. A small shop that does electical work here has no experience working on diesels so I hesitate to let him have at it to spend a lot of time and my $$$ trying to find the problem
__________________
1995 green 2500 3:54 K&N air filter, TST, EGT and Boost gauges, Amsoil synthetic oil in rear end Jacobs E brake
TST 230/605 power uprate kit.Bed liner, Reese 15K 5th wheel hitch, New name will be P
|
|
|
|