|
Too much smoke when cold and Stutter when returning to idle
I just put a #10 plate in along with the 3k gsk. My truck now has quite a bit of smoke when cold (unburned fuel) It didn't smoke much before. It also tends to have a stutter when the truck is returning to idle. This happens around 1000rpm or so. The idle may not be quite as smooth as before. I have the timing set to 15.5. The truck runs strong ~35psi of boost. I am quite pleased with the power and throttle response but not the smoke and blip in the idle. The truck @ 65mph is ~600 degrees on the pyro and 5psi of boost. I hope someone can shed some light on the situation. Also I have to crank my truck over longer to get it to start.
TTFN
CR Toney
__________________
'03 2500 QC LB 4x46sp CPL 8228 Smarty JR, FASS 150/95, Timbrens, airbox mod, Tranny Filter, Cool Hose, HE351 Centramatics, ATS ex manifold, 4" exhaust Cooler Tubz DT Free-Spin Fluidampr 150,000 mi 33psi 1250F SW3
'92 W350 w/ Hydra-Dec PTO hyd pump NV4500 HO injectors, 16cm housing, Borgeson Shaft
Last edited by CToney; 12-29-2005 at 03:43 PM..
|