View Single Post

Time for new Headgasket again
Old 10-19-2006, 04:06 AM   #1 (permalink)
CToney
Offline
Join Date: Jul 2001
Location: Gull Lake, Saskatchewan
Posts: 719
Angry Time for new Headgasket again

Did headgasket last January and now its seems to have gone again. Last time my oil ended up in my rad. This time hard to start and smoking bad on start up. Got my timing checked 13.5 and got it reset to 15.5 get home check oil the next day and coolant condensed under oil filler cap. I phoned to track down oil analysis results which were late coming and my potassium level was at 54 ppm and was flagged for possible coolant. I guess this time I will use an engine hoist to place the head on the block. I must have either got a bad gasket or damaged that one. The first time it went my truck was fueled a bit higher and I detuned it so I wouldn't have this problem again. Now I've spent $133 on new water pump, $429 on new rad, $624 on new injectors, $100 on new overflow valve, $1000 doing the headgasket the first time. Maybe I should just sell the truck and get my first gen engine into a F**D. Sorry about the complaining but, I needed to vent. How many times have you other guys had to do a headgasket?

Hoping the third time is not a charm, the second better work.

CR Toney
__________________
'03 2500 QC LB 4x46sp CPL 8228 Smarty JR, FASS 150/95, Timbrens, airbox mod, Tranny Filter, Cool Hose, HE351 Centramatics, ATS ex manifold, 4" exhaust Cooler Tubz DT Free-Spin Fluidampr 150,000 mi 33psi 1250F SW3
'92 W350 w/ Hydra-Dec PTO hyd pump NV4500 HO injectors, 16cm housing, Borgeson Shaft
  Reply With Quote