|
started new fuel system
well, while the truck is down i decided to start on the fuel system. first part is the tank pick-up tube. took a 12an (3/4 inch) fuel cell bulkhead and bored the bottom out to receive a 3/4 od aluminum tube. from here it goes to a aeromotive filter, then to a aeromotive a-1000 pump. still looking for a filter/water separator that will flow enough for the pump. i think i found one made by racor, it normally is found on diesel pumps at truck stops. they say it will flow 50-gpm with a 25 micron rating.
scot
__________________
96 2500 EC/LB, 174000 miles,AFE stage 2 w/outerware,5" D/E ehaust (no muffler),315/75-16 Pro Comp Mud Terrains, 3" BDS coil spacer, Dual Bilstein shocks up front,Goerend Bros T/L converter & valve body,ATS arc-ram intake,4k gsk,mag-hytec trans pan (double deep),mystery switch, ATS exhaust manifold
|