|
Can anyone help me with the wiring on my remote start?
I just installed a remote start kit on my 2000 Ram diesel truck. Everything is working fine except that it does not kick on the fuel pump when it tries to start the truck so all it does is spin over but doesn't start. It seems that it's not triggering the correct ignition wires, but I've got it hooked up via the wiring diagram I found on Bulldog's website. It shows that Ignition 1 is the dark blue wire and Ignition 2 is the black/white wire, and that's how I've got it hooked up, but obviously it's not sending a signal to the fuel pump with it connected this way. Any ideas?
__________________
2000 4x4 QC shortbed, 5" exhaust, silencer ring delete, BHAF, Vulcan big line kit, Edge Comp on 5X5, stock automatic transmission w/ Transgo shift kit, 2" leveling kit with 315/75/16 M/T Baja Claws on 16x8 M/T Classic Locks. 
|