Nevermind, i figured it out,
I cut the snaplock and when i cut it the spring came FLYING out!!!
Heres what We found out,
when the mirror was hit it got pushed back farther than it should and knocked one of the 3 bearings out of place, so put it back in place, put some grease in there and replaced the snaplock with a snapring.
NOW the only hard part was the fact that we had to compress the spring and it sure is a strong one, So we compressed it in the vise and put mechanics wire around it to keep it compressed, installed the spring and reasembled the mirror and cut the wire and DONE!!!
__________________
1997 5spd, Puller
1999 QC 3500,Auto 53 Block
1993 W250 Ext. Cab Auto, KDP DEAD!
1999 QC 8' DTT Auto.Silver71 P-Pumped!!!