|
Mine are finally installed, I'm not driving the truck everyday as I bought a Honda Insight to drive back & forth to work due to fuel costs. Anyway, I keep blowing IOD 10 amp fuses. I unplugged the left and then the right, and then the switch. The fuse doesn't blow with the sitch unplugged. I had some insulation between the switch and the ntu/bolt for the mirror. If I get a new switch, will that fix my problem or will I need to Dremel the nut/bolt? I did try a 20 amp fuse and took the switch out of it's location and just held it, the mirrirs would not adjust up & down only side to side..
__________________
2007 Quad Cab D3500 4x4 Dodge Long Bed Rhinolined, 6 speed manual, 2006 Host Yukon, 2005 Lund Explorer 1800 SS
Last edited by wcoomes; 05-26-2008 at 02:17 PM..
|