06-21-2004, 09:52 PM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Sep 2001
Location: Utah
Posts: 32
|
|
Injectors in----Idle down ???
OK, Heres my unexpected problem:
I installed a set of Bully Dog 50 hp injectors in the 93. I bled the lines and it started right up but the idle seems lower and it has a definite roughness that is noticeable until I rev it to probably 1500 rpm(don't have a tach). This is in neutral/no ac. In drive with ac on its really rough. I took it out for a 10--15 mile run to make sure the air was out but it didn't help any.
The stock injectors I pulled out gave a VERY smooth idle even in gear with ac on.
It seems(from the posts) like most guys see the opposite---an increase in idle when they upgrade injectors.
What should I be looking for---bad injector? ---could there still be air trapped in a line? I sprayed it of with brake cleaner and there are no leaks.
Any ideas appreciated.
__________________
1992 W250, auto trans w/cooler, 3.54, PW Injectors, 130,000 miles.
1993 W250, auto trans w/cooler
152,000 miles, Bully Dog Injectors.
1993 W250 CC, auto trans w/cooler,
3.54 LSD, 89,000 miles, stock.
|
|
|
|