08-24-2005, 03:30 PM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Nov 2004
Location: North Central KS
Posts: 370
|
|
Anybody install turnover ball
Figure this would get better exposure here, not much 1st gen stuff in the towing forum.
Need to get a goose hooked up to my 93. Anybody put a B&W in theirs? I am trying to decide if it is worth the $360 for one or just make my own. If I make my own I will just be threading the ball in and out as needed.
The thing I don't like about B&Ws for the 93 and older trucks is the bolts that hold the hitch to the frame are drilled through the bed floor, hitch, and frame all at once to be bolted in.
http://www.turnoverball.com/downloads/pdf/1300R.pdf
__________________
Mine: 93 W250 CC: Getrag 5spd, straightpipe, KDP dead. Isspro guages tach, pyro, boost. BHAF
89 XJ with 33s, 85 Yota Xcab in progress.
Dads rigs: 90 W250 reg cab, 727TF, stock farm truck
02 W2500 reg cab, stock, flatbed.
http://photobucket.com/albums/v323/a...lin/my%20junk/
|
|
|
|