04-05-2006, 01:08 AM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
|
|
Rag joint position?
I installed a Borgeson steering shaft on my 92 W250 (5 spd tranny). While installing the shaft I noticed that the end of the steering shaft where the rag joint mounts is approximately 12.5" from the firewall and on my 93 W250 (auto tranny) it is 10.5" inches from the firewall. Anyway, the clearence between the inner fender and the rag joint is pretty tight on the 92.
Anybody know what the factory measurement should be?
Thanks,
C. D. Hunter
__________________
1992 W250 LE Reg cab, G360, 3:55 gears w/LSD, Borgeson steering shaft, PSC steering box, Benz Spring Co. 2.5" lift in front, Cooper Discover 235/75 R16 tires on stock wheels and Line-X bed liner. 193K on the clock.
|
|
|
|