04-05-2006, 03:08 AM
|
#1 (permalink)
|
Offline
|
|
|
|
Custom Air Box to Turbo Tube
Okay I uploaded the pictures of my "Custom" intake hose, check them out in my gallery. The SS exhaust tip came from eBay, it is a 4" to 5" straight cut tip. The 4" fits in the turbo end pretty easily but the 5" end has to be shrunk down to about 4.75". I used a cut off wheel & put around 10 slices in it about 1/8 to 3/16 in. wide by 1" long, then used a couple of water hose clamps to collapse it till it would fit inside of the air box end then beat it in. I also heated up the ends as to allow for some stretch. It was a piece of cake.
http://www.turbodieselregister.com/u...&albumid=18243
__________________
1992 W250 Club Cab LE, NV4500 W/Tranny filter, S300 turbo, 5" stainless intake, 4" exhaust, ATS manifold, injector pump tweaked, New Era 370 EDMs, Air Dog 150, Borgeson shaft, Coolingmist Vari-cool, 3" Stainless CoolerTubz, 349HP/827TQ  .
|
|
|
|