11-21-2006, 03:07 AM
|
#1 (permalink)
|
Offline
|
|
|
|
piston lift pump pressure ?'s
Well I converted my truck to the p pump piston lift pump and installed a autometer ultralite II electric fuel pressure gauge.. it reads 55 psi at idle it draws down to say 50 psi driving it hard.. I rechecked the fittings, and bled the air all out and tried different settings on the needle valve setup to adjust it more.. and still 55 -60 psi.. man thats pretty high... I will have to check it with a mech oil pressure gauge tommarrow..it runs good and has no leaks so far..any ideas...? at least when I swap the p pump it will have a load of fuel pressure its its correct..
thanks,
Deo
__________________
2000 Excursion XLT 4x4, P Pump 12V Cummins, O ringed, lazer DV, 370's, G56 6 speed, Southbend FE clutch, guages, 4" Remote BD Ex. Brake, full vinyl floor.
http://picasaweb.google.com/therabbittree/Excursion02#
1992 Dodge W350 srw 4x4, Getrag, 3.07's, PODs, guages, 5"stack, 8' dumping flatbed,
|
|
|
|