02-11-2007, 06:48 PM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
|
|
3200 spring is in BUT. Need Help.
I put in the 3200 OMG spring today. However it doesn't seem quite right. I got the cover on the pump but found the lower throttle lever was not stopping against anything internally when I moved the top throttle arm to full fuel position. I could only feel the 3200rpm spring stretching when I went to full with the lever. Did I miss getting it in front of some lever or does the lower throttle lever not come up against resistance until the pump cavity pressure rises? At any rate I cannot get it to start at this point and have bled the injectors and have seen fuel come out behind the loosened injector nuts.
EDIT:Nothing wrong with the way I put things back together. I forgot i removed the high idle stop screw. There is nothing for the throttle to stop against. DUH.
__________________
1985 Dodge Ram 4x4 Prospector shortbed with 4BT; 3" lift & Air bags, 3.55 gears; NV4500; 4" stainless exhaust, HY35W, Bosch 190's, 6BTA intake horn and heater grid, 6BTA air filter housing with K&N.
Last edited by driverswanted; 02-13-2007 at 10:43 AM..
|
|
|
|