10-19-2009, 02:21 AM
|
#1 (permalink)
|
Offline
|
|
|
|
no start
i am working on a 92 w250 the wiring harnes for the engine shorted out and some the of the wires melted and became a molten mass of wire and plastic i spliced the wires and it started but wouldnt charge so had the alternator tested and its working fine putting out 15 volts . i put the alternator back on and the truck wont start checked all the fusible links for continuity with my tester and they are fine . all the grounds are fine . could the pcm be fried does it have anything to with the starting system as far as the starter goes?
__________________
'99 2500 shortbed, 5-spd, Juice w/attitude (hot unlock), AFE stg. 1 Pro-guard 7, straight piped, FASS HPFP, di pricol guages boost, Pyro, Fuel press. Custom B&W gooseneck hitch
|
|
|
|