07-10-2002, 01:07 AM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Jul 2001
Location: Nashville, TN
Posts: 48
|
|
PODs in... need advice
I just put the Lucas injectors in my truck and am having difficulty.
I like the power increase even though I have the power screw on the pump turned down(out) to keep the egt down (1225 max unloaded going uphill, 1100-1150 on flat ground w/26lbs of boost)
But I don't like the "haze" at idle. I followed Piers recommendations of 1.5mm timing and using the .060" washers(they were actually .063-.064) and still I have the "haze" and get a small cloud at startup.
Is there anything else I should try before I call and worry Piers?
Thanks,
David
__________________
1992 CC auto W250- 14cm2 exhaust housing w/Banks "Big Head wastgate actuator(Thanks to Keeno and Joe D), twin auxillary saddle tanks, "luminum" running boards, custom rear bumper, Janetty 3" exhaust, Skyjacker 2" lift front springs, BHAF,Lucas injectors
|
|
|
|