06-04-2003, 01:53 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Feb 2002
Location: Grantsburg, Indiana
Posts: 110
|
|
Springs for a '89 W250
I am going to use a set of 1" or 2 1/2" lift springs from Skyjacker on the front of my '89 CTD. I have already put a pair of 1" add a leafs on the rear some time ago.
If I go with the 1" front spring pack should I replace the rear add a leaf with a new 1" or with a 2 1/2" add a leaf since I already have a 1" installed to level the front and back?
Also if I go with the 2 1/2" all the way around will I have problems with my drive shafts? I've had a 4" kit on an 1979 Power Wagon and had no problems with the drive shafts. I can not see where a
2 1/2" would affect them.
Thanks.
Jeff
__________________
U.S. Navy Submarine service retired
NRA life member
NHAC life member
SASS
NCOWS
1992 W350 CTD Cab and Chassis, NV5600.
2001 2500 4x4 QC, SB, CTD, 5spd, Glacier LP, Draw Straw, Isspro gauges, AFE 4" exhaust.
|
|
|
|