Thread: 12v Excursion Redo
View Single Post

Old 03-28-2009, 08:05 PM   #10 (permalink)
therabbittree
Offline
 
therabbittree's Avatar
Join Date: Jan 2001
Location: LaGrangeville NY USA
Posts: 1,309
In order to fit the trans cross member I had to cut it down in height. After finishing the crossmember I went to install the drive shafts & I found they need to be cut / modified too as the trans is longer . ha.. so when I modify the suspension lift to lower the truck I will measure the shaft lengths and get that done..ha..







__________________
2000 Excursion XLT 4x4, P Pump 12V Cummins, O ringed, lazer DV, 370's, G56 6 speed, Southbend FE clutch, guages, 4" Remote BD Ex. Brake, full vinyl floor.
http://picasaweb.google.com/therabbittree/Excursion02#
1992 Dodge W350 srw 4x4, Getrag, 3.07's, PODs, guages, 5"stack, 8' dumping flatbed,
  Reply With Quote