Alternator Rebuild Difficulty
I'm trying to rebuild the alternator but the instructions from the rebuild kit (geno's) leave a little to be desired. I'm attempting to separate the front from the back and the instructions say to gently tap them apart. I've been tapping them apart and used some screwdrivers to try to persuade them some but it still seems like it's not going as easily as it "should". They have a small gap but don't want to go any further. I don't want to break anything. Is there a screw or nut that I could've missed?
__________________
97 4X4 2500 LWB 315/75/16 Pro Comp Xtreme A/T, 4" exhaust, 215 injectors, #10 Plate, KORE springs, Lorenz towers, Bilstein 7100s, DSS, KDP tabbed finally @202K  EGR Stolen... really gonna miss it 
Last edited by EBansberg; 06-17-2009 at 04:29 AM..
Reason: picture not showing
|