View Single Post

Questions about Smarty vs TST vs EZ
Old 10-31-2009, 02:52 AM   #1 (permalink)
Patriot_RAM
Offline
Join Date: Jul 2004
Location: U.S.A.
Posts: 498
Questions about Smarty vs TST vs EZ

Hey Guys,

I need to get some advice from those who are experienced with all three boxes. I currently run the TST PMCR stacked with the Edge EZ. I'm curious about swapping some boxes around since I've had these for a few years and don't know what to expect with the Smarty. (It wasn't out when I did my mods)

I have an early '04 with the 305/555. It has a FASS pump, SPS66 turbo, stock CP3 and South Bend DD clutch. With my EZ on level 3 and the TST on 5 / 7, I'm pushing 512hp and 934tq at the rear wheels.

Knowing what I'm running, what combinations would produce more power and how much more should I expect? I've gotten a little behind on the boxes the past few years, so I don't know anything at all about the Smarty.

The only other issue that I want to mention is that the SPS66 with my current setup is very slow to spool on the low end, but acceptable at about 1900 -2000 rpm and higher.

Thanks!!!
__________________
-----
2004 4X4 QC 6 Sp, Edge EZ, TST PMCR, SBC DD Clutch, Airraid, 5" RIP, Silencer Ring and Muffler MIA, Pyro, Boost & Fuel Pressure, H2 Wheels, Bushwacker Flares, Nasta Steps, Brite Box & PIAA Lights, MileMarker M12000, Road Armor, Kore Race, FASS, SPS66
http://www.frugalhomesteaders.net

Last edited by Patriot_RAM; 01-06-2011 at 03:02 AM..
  Reply With Quote