|
It doesn't wiggle at all or make any type of noise. Noise drives me crazy! The tube is a flex tube and you can bend it anywhere you like. I went to radio shack and bought an 18 inch flexible microphone tube. I also bought two base mounts for the tube. The base mounts are threaded and screw into the tube. One on the bottom mounted to the plastic and one is mounted to the back of the Smarty so that i can spinn it off and remove the Smarty at will. The flex tube is chrome but i slid a piece of wire loom over it to hide the Smarty wire inside of it. I was looking at GPS mounts before i went this route. Walk around Radio Shack for a while and you will find the right set up for your application with a little imagination. Good luck!
__________________
06, G56, quad, long, Vision 19.5s, BAK Aluminum bed cover, 4" Donaldson w/ 5" stack, Amsoil remote, Bilstein 5100, Leveling Springs, CFM + intake, custom air intake system, BD Special, FCA self mod, DFL, AD-150 II, Smarty POD, MP8, SB 3250 DD, Gauges, Hertz, Audison, Kenwood, JL W6s.
|