[cj hall]

hello to all

Tonight after work I started the make over of the 2001 dodge I got a year a go. it has a stock lift pump that is weak, will be burning vegetable oil in this one so needed to start by puting on a heated tank and a fass unit,

the tank is a stock one with a heating loop (arctic fox) this was installed and a new dip tube was installed the tank was from a wrecked 2001 so it only needed to be cleaned and all the parts put on it. this was done around a month ago.
The fass unit is a 150/95 big filter unit, the only thing about the fass unit I dont like is the mounting brackets they send, so this time I took my time and made my own using nothing they sent. I wanted it to be rubber mounted and to the frame and up as high as it could be with room to hook up all the hoses to and from the engine and fuel tank. not asking for much here.

the install went great and the holes in the frame worked great for mounting the bracket. the parts I made are power coated bright red the pump housing is red also no other holes needed in the frame dodge put them there

here are a few pictures of the brackets and the punp installed on the truck

thanks for reading

I will post more pictures in the next few days.
hope to finnish the install this weekend if not sooner.

cj hall