[R.Taylor]

And the last 5 pics..... The one picture that shows the white plastic part... Do not cover it, It moves with the door lock assembly. If you have a veneer roller it makes it a lot easier on the fingers plus you can really seal the factory plastic liner back down better then the factory did! After you get the factory plastic liner back down you will see where the holes go for the hooks that are on the door panel itself... That's where you cut, Like an upside down T, Stick your finger's in and make it a flush flat surface for the bottom of the hook. Fanagle the panel back on... The bottom hooks start first, Get the door lock knob poking through the hole, Push in and down. A few bumps here and there and it's on. You'll need a 10mm socket to take off and on the inside door handle and a phillips screwdriver for the three screws that hold the door panle on. I did not put the material behind the door handle mechanism nor behind the mating surface of the speakers as shown.