09-12-2009, 08:03 AM
|
#1 (permalink)
|
Offline
|
|
|
|
Seems I have a Leak.
I have an oil Leak.. It is dripping off the bottom between the bell housing and the oil pan... and is Oil.. I see it dripping down from the right rear corner of the engine block, pass side... Seems to be dripping down there and behind the oil pan and off... I checked behind the valve cover and it is a little dirty but not wet..Head Gasket??.. It is wet below the outlet of the #6 port of the Exhaust Manifold..
Is there a commonality for a leak at the head in this area? (pass side rear)..I had the engine rebuilt around 40K ago and I do tow heavy a few times a year... I try not to get the engine too hot and I do have a engine oil cooler. (my own design). Have not had the head re-torqued since the rebuild.. is that what it might need?
If it is the Head Gasket, How much would a shop charge to do this? I have never done this or messed with the injectors.
TIA,
Eric
__________________
New 2009 SXT 3500 LB. Bright Silver..Stock for now. Rhino Liner, Ricksons 19.5" rims and Michelin XDE-MS 245/70R-19.5" tires.. "F" Rated,. 12 ply.. Stock tires in winter ..Self Made Winter fronts... Truck name is Silver Bullet!
|
|
|
|