THE 24V code list

[ToolManTimTaylor]

Guys .... it took a major long time to do this and this is the best format I could come up with to fit it all.
Hope they help ya out!

TMTT

---

(M)= Malfunction Indicator Lamp (MIL) is on during engine operation if this DTC was recorded
MIL is displayed as an engine icon on instrument panel.

(G)= Generator lamp illuminated

---

The P Done codes!

"P-PCU" "P-DONE" = No codes between Pcu Start And Pcu Finish


"P-ECU" "P-DONE" = No Codes between Ecu Start And Ecu Finish

---

Code List

---

P0030 (M) 1/1 O2 Sensor Heater Relay Circuit Problem detected in oxygen sensor heater relay circuit.

P0036 (M) 1/2 O2 Sensor Heater Relay Circuit Problem detected in oxygen sensor heater relay circuit.

P0106 Barometric Pressure Out of Range MAP sensor input voltage out of an acceptable range
detected during reading of barometric pressure at key-on.

P0107 (M) Map Sensor Voltage Too Low MAP sensor input below minimum acceptable voltage.

P0108 (M) Map Sensor Voltage Too High MAP sensor input above maximum acceptable voltage.

P0112 (M) Intake Air Temp Sensor Voltage Low Intake air (charge) temperature sensor input below the
minimum acceptable voltage.

P0113 (M) Intake Air Temp Sensor Voltage High Intake air (charge) temperature sensor input above the
maximum acceptable voltage.

P0116 A rationatilty error has been detected in the coolant temp
sensor.

P0117 (M) ECT Sensor Voltage Too Low Engine coolant temperature sensor input below the
minimum acceptable voltage.

P0118 (M) ECT Sensor Voltage Too High Engine coolant temperature sensor input above the
maximum acceptable voltage.

P0121 (M) TPS Voltage Does Not Agree With
MAP
TPS signal does not correlate to MAP sensor signal.

P0121 (M) Accelerator Position Sensor (APPS)
Signal Voltage Too Low
APPS voltage input below the minimum acceptable
voltage.

P0122 (M) Throttle Position Sensor Voltage Low Throttle position sensor input below the acceptable
voltage range.

P0122 (M) Accelerator Position Sensor (APPS)
Signal Voltage Too Low
APPS voltage input below the minimum acceptable
voltage.

P0123 (M) Throttle Position Sensor Voltage
High
Throttle position sensor input above the maximum
acceptable voltage.