09-13-2004, 10:35 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Sep 2001
Location: Killeen, Tx
Posts: 2,616
|
|
No dash air
After replacing the seals in my vacuum pump I started the engine to check for leaks. No leaks, but no dash air either. The vacuum pump is working and the servo that moves the door is good. I'm thinking the dash selector has quit. There is very little vacuum going to the servo. I haven't pulled the dash apart yet, just want to know if there is something else to look for.
__________________
97 3500, 2wd, G56 6-speed, 3.54 gears, Austin Injection custom fuel plate for speedin' it up and a Jacobs e-brake for slowin' it down. Member of 875k+ mileage club. Original engine gave up at 790k
|
|
|
|