05-06-2001, 12:38 AM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Dec 2000
Location: The house on the hill
Posts: 664
|
|
Fuel Pressure gauge
I am considering placing a mechanical fuel pressure gauge in my '95. I am concerned about fuel in the cab, so I am considering going with stainless tubing through the firewall then rubber or nylon to the inlet banjo on the injection pump, this would seem safer but I wanted to bounce it off the bros. out there. Maybe put a circle in the stainless to take up any possible vibration. Was set on the idea of nylon all the way but.....what if it gets snagged or rubbed etc.
------------------
9535hundred
|
|
|
|