03-05-2007, 11:50 PM
|
#1 (permalink)
|
Offline
|
|
|
|
Rebuilding my power steering pump....
anybody done this? I Bought a kit from NAPA and since I'm going to do the vacuum pump I thought I would eliminate that leak in the ps pump too. Any tips, suggestions, warnings?
edit: is a ps rebuild more difficult than a vacuum pump and go with a reman ps pump or is it similar to the vacuum pump?
Chuck
__________________
98.5 2500 QC ISB 4x4, Auto DTT TC & VB, JRE 4" exhaust w/5"Tip,F1 Mach 2's, AirBullDog hood, Smarty, Centramatics, 3rd gen trackbar, DSS, PSC 3Turn box, Rancho 9000 in cab adjust, Mag-Hytec trans&diff covers, EGR rear disc, Mr Bob's Silicone Hose kit
Last edited by rotohead; 03-06-2007 at 12:39 AM..
|
|
|
|