|
Power Steering Cooler - One or Both Return Lines?
I am putting in a new PS pump (higher output) and will be adding a cooler to the low pressure return side to keep it cooler. I see there are two return lines in the hydraulic system. One from the gear and one from the brake booster. Do I need to run both return lines through the cooler or just one of them? If I plumb both through the cooler would I need to worry about flow volumes and use larger fittings and a larger hose diameter between the cooler and pump reservoir return fitting? TIA.
-Deon
__________________
1999 2500 QC, 4X4, Goerend Trans/ATS Commander, 3.54 limited slip
DT Trac Bar - DSS - DD3 Jammers - Smarty - Edge Comp - Mag-Hytec DD tranny pan & rear diff. - Rod's Pod with DiPricol gauges (EGT, Trans, Boost, Fuel Press)
1986 30' Holiday Rambler TT for fun times...
|