08-26-2009, 01:23 AM
|
#1 (permalink)
|
Offline
|
|
|
|
Front rotors replacement, 99 2500 4x4 - HUB assy too??
I gents, for years I've tried to be careful and not let the front pads get too low.
Well, just screwed up, they got low, and one of the 4 went metal to metal.
I have to replace the rotors.
Going to go with the slotted rotors from brakeperformance.com, USA made.. on sale now.....
I use the Hawk pads from Genos.....
The Question is, should I just do the bearing in the same shot?
I know it's a premium price to do that, but darn, it has to come out anyway.
The whole drive the wheel studs out, drive new one in... I probably need a few new wheel studs too. Some are a bit finicky when putting the lugs nuts back on.
I live in NY, I have 80K on the truck.
If they were even 100bux each, I would do it - no 2nd thoughts.
But at 300 / unit, it makes me think twice for sure.
Does someone sell a hub with the rotor and studs all put together, with a good rotor?
TIA...
-Bob
__________________
99 2500 QC 4x4,ISB, Auto, 3.54,All tow opts,Flame Red,Warn front hitch,Warn MM w/6klb Warn,SmittyBuilt step Bars,Mag-Hytech Frnt & Rear Diff & Trans pans.ARE Cap,bed rug.Reese Titan Class V.305x75 Toyo OCMT on 16x8AR.MBRP4"T304pro.Automtrs in mod'ed dash pod. Westech FP gauge.SS AdjTB & Gen3 mnt
|
|
|
|