10-07-2001, 10:32 AM
|
#1 (permalink)
|
Offline
|
|
Join Date: Apr 2001
Location: Oakridge, Oregon
Posts: 723
|
|
Opinion Needed!!!!!!
I currently have a 96' CTD, SLT, Club Cab, LWB, 2 wheel drive(up for sell)....Looking to upgrade to a one ton.....I will be doing alot of pulling.....up to about 17000lbs. plus about 7000lbs of trailer......should i go for the 24 valve 5 or 6 speed...or should it be the H.O....maybe even an automatic.....or should i stick with the 12 valvers 5 speed......Do I need to watch out for the 5th gear nut on all manual tranny's????? I will only be looking at used one tons. Thanks in advance to all.
Thanks
Jason
__________________
Friends help you move....Real Friends help you move the _bodies_!!!
99' 3500, 252K miles, Full DTT tranny w/89% TC on 9/30/03 at 198,000 miles, etc, etc. (Sold)
97' 2500, 144,640 miles, 4x4, 5-speed, California model/ EGR installed. Bone Stock. (Just Purchased)
Last edited by CumminsPuller; 10-15-2001 at 07:50 PM..
|
|
|
|