04-19-2005, 12:28 PM
|
#1 (permalink)
|
Offline
|
|
|
|
bad lift pump or gauge?
A couple days ago my gauge started reading erratically. when I first noticed it it was reading 1.5 psi, I stopped the truck, shut it off and bumped the starter and got 2.5psi. On the next start, it was back to the normal reading of 6.5 psi until I pulled the pressure down @ WOT and stuck at 2.5 psi again.Now the gauge might get up to 1.5 psi after the truck has been running for a little while. Could the lift pump be dying or is my gauge TU? The gauge is a mechanical DiPricol that I put coolant in the line after the isolator, there are no visible bubbles in the line and the coolant is still green so I don't think the Isolator is bad.Will a lift pump go bad intermittently like this? I am going to the local Cummins place to put a gauge on it this morning
__________________
NOW 361/677 '07.5 2500 QC/SB ETJ/68RFE 4x4 6" Fabtech lift, 37x13.5r20 Procomp X all terrains, 20"x10" KMC XD 766 "Diesel" wheels, AFE MCII, smarty
GONE! 457/1002 2003.5, 3500SRW,
Last edited by Scrappy; 04-19-2005 at 12:31 PM..
|
|
|
|