02-12-2006, 03:04 AM
|
#1 (permalink)
|
Offline
|
|
Join Date: Nov 2000
Location: Mani. Waters,WI
Posts: 184
|
|
Guage lighting prob
Installed my EGT-Boost-Trans Temp today and the guage lights don't work. I checked and the ground is good, guages light up when I connect to + on batt. Geno's said to use the OR/BR wire on my '03 which I did using a tap. My wire is OR/WH, is this the right wire? I used 14ga wire for my lights could the tap not make a good connection with the factory wire (18ga?) harness? After opening it back up it seems there should be power flowing but I get no reading at that point on a meter. The tap I used is the type that drives a piece of metal to make the connection when you close the cover. Thanks for any advice.
Ken
__________________
95-2500-4x4-5Sp-Isspro Boost & EGT-ARE CX cap w/ full door-Jardine4"turbo to tail-TST06-Sport Headlights-
03-3500-HO-4x2-48re-dually-Mag Hytec Double Deep Pan-Isspro EGT, Boost, Trans Temp----SOLD
|
|
|
|