07-26-2006, 10:42 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Apr 2005
Location: Springfield, IL
Posts: 130
|
|
Install Done
Here are some pictures of my finished installation of Auto Meter Phantom II gauges and Trailer Brake Control.
NavyDood gave an excellent install report (which I used as a guide). I'm only going to give an overview. The gauge install went smooth and with out problems, other than a fool (me) laying one of the wires on the soldering iron. Used the RLT boost bolt supplied by Geno's for the boost gauge. And mounted the thermocouple after the turbo in the pre-tapped port on the Jake Brake. Bought the Auto Meter LED dimmer, tapped a switched 12v line and mounted the dimmer box on one of the hood release handle screws. Out of the way but eacy to reach. A toggle switch on the A piller mount for the gauge lights.
__________________
'06 Bright  White 3500 Laramie Quad Cab Dually 2WD LWB, 6 sp manual trans (3.73 rear), Jake Brake. AM Phantom II gauges, Cool Power Intake with Cool Blue Hose, PML diff cover, B&W hitch and Line-X.
|
|
|
|