11-01-2009, 10:51 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Dec 2007
Location: DFW
Posts: 619
|
|
06 mega owners (4x4) please help
one ton only SRW
when empty how much clearence between overload spring and rubber pad on the frt side of the overload?
Second,
i was yanking the frt drive shaft to the frnt axle and noticed that the yoke coming out of the transfer case, wiggles quite a bit. near an 1/8 of an inch of play. NO play in the ujoint but as it enters the transfer case.
Is this bad/normal???
TIA
jesse
|
|
|
|