06-19-2004, 05:34 AM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Jun 2004
Location: Saugus, CA.
Posts: 10
|
|
Performance Question On New Edge EZ Install
I have had a new Edge EZ on my workbench for two weeks waiting on a cold air kit and gages. I couldn't stand it anymore and thought I would plug it in for a test drive. Decided to install the boost elbow also. Noticed filter minder was at 35% and the filter looked dirty. Called the shop to see if my new cold air kit had come in today by chance - no luck. Put everything back together and reset the filter minder.
When I mashed the pedal and went WOT, the truck "hesitates" at about 2800-3000 RPM in third gear. I didn't notice it in lower gears but it may have just powered through and shifted. It seems to only be having this problem from 3rd to OD. It feels like it is defueling although I'm not sure I even know what that is.
The filter minder is sucked down to 100%!!
Am I running out of air? Am I running out of fuel? Will the box defuel if I'm running out of air?
Any help or suggestions will be appreciated!! This turbo diesel stuff is all still very new for me. I'm luvin it though!
__________________
03 2500 Quad 4X4 SB SO 235 Calif Edge EZ AirRaid Quickfit BHAF Intake 48RE with Mag-Hytech DD pan 3.73 with Mag-Hytech Cover Leveling Kit Rancho 9000s BFG 315/70/17 American Rims Westin Step Tubes 4-inch Exhaust (I just want to grow up and have the HO I couldn't get in California!)
|
|
|
|