02-22-2006, 05:24 AM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Dec 2005
Posts: 1
|
|
problem after edge ez
Hey guys and or gals I have a little problem. I got an edge ez yesterday so I thought I would hook it up real quick before I went to work. So I put it on and started it up. First it did not want to start and when it did it idled like **** and started to lope so I shut it off. I checked the connections and used dielectric grease. Started it up and same thing. With the truck running I started checking the plugs again and when I touched the return line from the pressure relief valve it was VERY hot. So I shut it off and removed the ez and left for work. I could tell before I got out of the driveway something was wrong. Anything past 1/3 throttle and I lose power. If I keep into the throttle it will start to cut out. I also noticed that anything more than idle and the fuel pressure will drop. With the fass pump I have never seen less than 17 psi but getting on the highway it went down to around 10 psi before I let out to turn around and go home. I also have rail pressure codes p0191 and p0192.
__________________
05 2500 4x4 nv5600,tst pmcr w/gauges,isspro boost and fuel gauges,fass pump,strait pipe(clutch and turbo comming soon)
|
|
|
|