07-01-2006, 07:17 AM
|
#1 (permalink)
|
Offline
|
|
|
|
Oil Change Surprise!
While changing the oil tonight I was having some trouble getting the new oil filter on (from below). The threads just wouldn't catch. I finally pulled the filter down to look at it and make sure I hadn't bunged up anything when something fell down and nearly hit me in the face.
It only took a quick glance to see that it was... an oil filter gasket!
No, the new filter still had it's gasket, so I took a closer look at the old one. Sure enough, the gasket had pulled right out of the old filter. I've never had anything like that happen before.
I use nothing but Fleetguard Stratapore filters, always oil the gasket with new oil, and only "snug up" a new filter with a wrench... just a little beyond "hand tight".
This was the first time I've changed the oil on this truck with the engine HOT. Usually, buy the time I get to it the oil is just pleasently warm. This time there wasn't anything pleasent about the oil temp.
Bob
__________________
Flame Red '04 2500 SLT QC/SB HO (305/555) 48RE 4x2 - Ranch Hand front and rear bumpers, AirDog PF100, Smarty Jr.
Last edited by Pawpaw; 07-01-2006 at 07:20 AM..
|
|
|
|