02-08-2009, 08:40 PM
|
#1 (permalink)
|
Offline
|
|
Join Date: Jan 2002
Location: Little Mountain
Posts: 76
|
|
EGT`s
 Wanting to know what you normally see cruising, & when you put the hammer down? Relatively flat ground no load 70 to75 mph I see high 300 to low 500. If I get on it hard no load I see 1050 to 1200, is that normal ? I thought I remember reading an article by Joe Donelly about this on different generation trucks & how much difference there was between these trucks. I guess what I`am really after is what will a 3rd gen truck stand on a regular basis without anything melting.I purchased an edge insight to monitor these things & also have a ( smarty jr. not installed yet) but don`t want to do anything dumb. Almost forgot EGT probe installed before turbo where #5 drops into turbo. Thanks for any useable info.
__________________
07 2500 Mega-Cab 4x4,flame red,auto,3.73,towing mirrors,fog lights,forged wheels,dodge aluminum tube steps,mpc tool tray combo,kilby condenser gaurd,& white knight back-up lights. 1982 FXRS, 88" S&S stroker kit,S&S super G carb., patriotic paint & owned since new.Newest pony 2004 Ultra-Classic EFI .
|
|
|
|