08-21-2004, 01:29 AM
|
#1 (permalink)
|
Offline
|
|
Join Date: Nov 2000
Location: Joliet, IL
Posts: 1,086
|
|
Twins Almost Done, Questions
My twins are almost done being fabricated. Now the details come in.
On the supply line to the stock turbo the fitting appears to have a restricting orifice that is much smaller than the line feeding it. The hose I had made to supply the BHT3B does not have such a restriction. Do I need to restict it so that it will not overrun the drain ?
If I want about 50#'s of boost, what opening pressure do I set the external waste gate at. Right now I am planning to set it very low and increase it as I get data back from testing.
Thanks
Dennis
__________________
2001.5 3500 4X4 Quad Cab, ETH. Kanduco Grill Inserts, SPA Boost/EGT Gauges,TST PowerMax 3, 70 PSI Home Made Twins, Jammer 5 injectors, Goerend Triple Disk 47RH Billet Shafts, 5" straight piped Exhaust.
|
|
|
|