01-22-2004, 11:46 PM
|
#1 (permalink)
|
|
Formerly rwallace
Non Member
Offline
|
|
|
|
700 hp club..... hello!
Well today we got my 1998 Cummins running after a long 4 months and broke it in on the dyno! We made 701.1 HP and 1421.0 ft-lbs after SAE correction. The uncorrected horsepower was 710. This is w/ a stock 215 12mm fuel pump and a set of twins running a STOCK HX-40/18 and HT3B/36. The runs were made on David Dunbar's dynojet 248. Most of the credit is due to Jeff Garmon's pump tuning on the dyno. The guy knows his stuff!!
__________________
1994 Dodge 3500 flatbed 5sp reg cab
1998 Dodge 2500 5sp reg cab 4x4
Garmon diesel powered
710hp
1421tq
Last edited by CumminFast; 01-23-2004 at 12:49 AM..
|
|
|
|