12-31-2004, 05:00 AM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Sep 2004
Location: Kentucky
Posts: 244
|
|
Gas tach on a diesel engine
I got my gas engine tach hooked up and working on my truck tonight. I bolted two small metal tabs 180 apart on my balancer and fabbed a bracket to mount a 3 wire prox to read the tabs. One wire to ground, one to 12v, the other to the tach. Set the tach on 4 cylinder. Works like a charm so far. I am not sure what the prox is rated for, we use both 120VAC and 12-24VDC at work and there is no tag or part number on the prox. It wasn't a 5 finger discount either, it was in the scrap pile. The tach I am using now is an 8000rpm Sunpro, but I have a 3 3/8" 4,000rpm Isspro I will be mounting as soon as I get a cup for it. 8K is kinda pointless on a diesel.
Danny
__________________
1993 Ford F350 4x4, reg cab, SRW, ZF 5sp., CPL2174 12V Cummins, BHAF, 4" exhaust, 3.55s, 12K Warn winch, Westach Boost/EGT combo gauge, 100 plate.
|
|
|
|