|
HELP!! OBD wiring 06 swap
I got my 06 commonrail motor powered up on the floor before i stuffed it in my 98 12v I am getting no communication to a Mac scanner or a snap-on, I have the can bus+ and - hooked up to my obd plug where the ticm was hooked up, I tried the other positions and no go!!! Autoworld told me today that my 60pin connector on the ecm has a white/violet wire in pin #28 that goes to the obd plug also, but when i lokked on the connector there was no wire, just a rubber plug... I will call them again tomorrow but If, anyone knows how to wire my 06 manual trans motor i would appreciate some help. everything else seems to be working but I cant see data to know..
__________________
1998 2500 4x4 cc sb Just installed 07 common-rail!!!BHAF, 4" exh, 2 stage water/meth, Holley Blue pump, Smarty Revo/TNT, TCS low stall triple-disc coverter, built 48re trans, custom remote trans-cooler, 35's, 01 sport nose. Old motor:12v, honed 370's, #5 plate, HX-40 38psi,191DV's,3k gov,  
|
Linear Mode
