02-02-2003, 04:40 PM
|
#1 (permalink)
|
|
Non Member
Offline
|
|
Join Date: Mar 2002
Location: Santa Cruz , CA.
Posts: 382
|
|
Ripped the center out of my clutch! Cummins IH
Well I ripped the center out of my clutch 350+ miles from home but only 5 blocks from my cousin's house in Losangeles but it did hold on long enough to pass the Yuppy in the SUV that was trying to out run me. I have a GM dirve line, ( 4 speed grany gear SM420 and Ranger overdrive). I bought the clutch South Bend Clutch reccomended but they said this might happen. Guess I might have to put a cam plate back in my pump!! I'm going to be able to do the job here in my cousin's drivway. Im wondering If I should get the same style clutch I have now with the big springs in the center or get a solid disk with no springs. I don't really know how important those springs in the center are. The clutch never did slip on me. Anybody know of a good clutch supplier in Losangeles?
Thanks,
Treven.
__________________
'96 6BT in my '80 IH scout. 370 injectors. Timing set at 15 deg. O plate, 3K GSK installed. Hx40 compressor housing and wheel. KDP Tabbed. Boost controller, 3.5" straight pipe, BIG intercooler and air filter. Pics here http://community.webshots.com/album/44268533sCvIJm
|
|
|
|