04-11-2007, 01:40 AM
|
#1 (permalink)
|
Offline
|
|
Join Date: Sep 2005
Posts: 6,544
|
|
Anybody else?? I don't want to be alone...
As some of you may remember, I set up a auxilary fuel tank to act as a buffer for dirt and water, before it gets into the main tank...
Well, I decided today to clean the spilled diesel from my toolbox (mental note, make sure the fuel cap is ON the aux tank before driving...) and decided to take a look inside the aux tank (it has a 4 inch or so opening)...
To my surprise, not only do I see blobs of water on the bottom but the entire bottom is metal flaked!!!! Looks like brass flecks...
Now, I know some of you might say the metal flake is from your pump or was already in the aux tank, but I completely swabbed the inside out and it was spotless before I started using it...and I don't pump into the tank, only from it. The only way it could have gotten in there is from the station's pumps!
Just wondering if anyone else ever noticed this?? I can't think this could be too good for a OE lift pump...
steved
__________________
2004.5 2500 4wd NV5600
|
|
|
|